High thermodynamic stability and extraordinary kinetic inertness of copper(II) complexes with 1,4,8,11-tetraazacyclotetradecane-1,8-bis(methylphosphonic acid): example of a rare isomerism between kinetically inert penta- and hexacoordinated copper(II) complexes

In an aqueous solution at room temperature, 1,4,8,11-tetraazacyclotetradecane-1,8-bis(methylphosphonic acid) (H(4)L(1)) and Cu(I) (I) form a pentacoordinated (pc) complex, pc-[Cu(L(1))](2-), exhibiting conformation I of the cyclam ring. At high temperature, the complex isomerises to a hexacoordinated isomer, trans-O,O-[Cu(L(1))](2-), with a trans-III conformation of the cyclam ring. In pc-[Cu(L(1))](2-), four ring nitrogen atoms and one phosphonate oxygen atom are arranged around Cu(I) (I) in a structure that is half-way between a trigonal bipyramid and a tetragonal pyramid, with one phosphonic acid group uncoordinated. In the trans-O,O-[Cu(L(1))](2-) isomer, the nitrogen atoms form a plane and the phosphonic acid groups are in a mutually trans configuration. A structurally very similar ligand, 4-methyl-1,4,8,11-tetraazacyclotetradecane-1,8-bis(methylphosphonic acid) (H(4)L(2)), forms an analogous pentacoordinated complex, pc-[Cu(L(2))](2-), at room temperature. However, the complex does not isomerise to the octahedral complex analogous to trans-O,O-[Cu(L(1))](2-). Because of the high thermodynamic stability of pc-[Cu(L(1))](2-), (logbeta=25.40(4), 25 degrees C, I=0.1 mol dm(-3) KNO(3)) and the formation of protonated species, Cu(I) (I) is fully complexed in acidic solution (-log [H(+)] approximately 3). Acid-assisted decomplexation of both of the isomers of [Cu(H(2)L(1))] takes place only after protonation of both uncoordinated oxygen atoms of each phosphonate moiety and at least one nitrogen atom of the cycle. The exceptional kinetic inertness of both isomers is illustrated by their half-lives tau(1/2)=19.7 min for pc-[Cu(H(2)L(1))] and tau(1/2) about seven months for trans-O,O-[Cu(H(2)L(1))] for decomplexation in 5 M HClO(4) at 25 degrees C. The mechanism of formation of pc-[Cu(L(1))](2-) is similar to those observed for other macrocyclic complexes.     

Determination of lifetimes and hyperfine splittings of Tl statesnP 3/2 by level-crossing spectroscopy with two-photon excitation

Level-crossing spectroscopy with pulsed two-photon excitation is used to determine life-times and for the first time to determine hyperfine splittings. The experiments have been performed on thalliumnP _3/2 states (n=8, 9 andn=8–11 respectively). By appropriate choice of the polarization and direction of incident light — and, thereby, of the two-photon transition operator — the signal ratio of neighbouring Δm=2 crossings is altered. Thus, in the case of overlapping crossings improved resolution can be obtained without further efforts.     

Simple test system for single molecule recognition force microscopy

We have established an easy-to-use test system for detecting receptor-ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin-biotin, probably the best characterized receptor-ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG₈₀₀ diamine was glutarylated, the mono-adduct NH₂-PEG-COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin-PEG-COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin-PEG-NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin-biotin recognition events were discriminated from nonspecific tip-mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (<13 nm), the characteristic nonlinear force-distance relation of the PEG linker, and by specific block with excess of free d-biotin. The convenience of the test system allowed to evaluate, and compare, different methods and conditions of tip aminofunctionalization with respect to specific binding and nonspecific adhesion. It is concluded that this system is well suited as calibration or start-up kit for single molecule recognition force microscopy.     

Synthese des Dysidins

Synthesis of Dysidin The synthesis of dysidin ((?)- 1 ), the enantiomer of a metabolite of the marine sponge Dysidea herbacea, is described. To effect the synthesis, (±)-5-isopropyl-4-methoxy-3-pyrrolin-2-one ( 7 ) is converted to its lithium salt and reacted with (?)-(5R,2E)-3-methoxy-5-trichloromethyl-2-hexenoyl chloride ((-)- 11 ) to give (?)- 1 and its diastereoisomer (+)-5-epidysidin ((+)- 12 ) epimeric at C(5) of the pyrrolinone ring. The (?)-acyl chloride (?)- 11 has been synthesized from (+)-(R)-3-(trichloromethyl)butanoic acid ((+)- 8 ) via the intermediates (+)- 9 and (?)- 10 , the pyrrolinone 7 from N-benzyl-oxycarbonyl-L-valine via the intermediate 5 . The enantiomers of acid 8 have been resolved by fractional crystallization of their diastereoisomeric N-(1-phenylethyl)amides. The (R)-chirality of (+)- 8 was determined by comparing the ¹H-NMR spectra of the diastereoisomeric N-(1-phenylethyl)amides 16 and 17 , made from (+)- 8 by substituting deuterium for chlorine, with the spectra of the N-(1-phenylethyl)amides 14 and 15 of known absolute configuration. This correlation shows that literature value (R) for (?)- 8 is in error. Therefore, the structural formulae of (?)-dysidenin and (+)-isodysidenin, two other metabolites of D.herbacea, have to be changed to their mirror images as shown in formulae (?)- 3 and (+)- 4 , respectively.     

Reactivity of 5,10:8,14-Disecosteroids: An unusual rearrangement of cyclodecene-1,4-dione systems to five-membered-ring spiro-γ-lactones

Upon heating in AcOH, the stereoisomeric (Z)- and (R)-6,9-dioxocyclodex-3-enyl derivatives, 5 and 6 , respectively, obtained by HgO/I₂ oxidation of 5-hydroxy-8-oxo-8,14-seco-5α-androstane-3β,17β-diyl diacetate ( 3 ), undergo an unusual intramolecular rearrangement to give the corresponding unsaturated (5R,9R)- and (5R,9S)-spiro-lactones 7 and 8 , respectively. Hydroxylation of the C?C bond in 7 and 8 , and subsequent glycol cleavage of the resulting diols 9 and 10 afforded the epimeric spiro-lactones (5R,9S)- 11 and (5R,9R)- 14 , respectively, and in both cases, the ring-D-containing fragments 12 and 13 .     

Transition metal-catalyzed intermolecular [5+2] and [5+2+1] cycloadditions of allenes and vinylcyclopropanes

Initial examples of the intermolecular Rh(I)-catalyzed [5+2] cycloaddition reaction of bifunctional allenes and vinylcyclopropanes are described. The reactions proceed with facility and in yields of up to 99% with a variety of alkyne-, ester-, styrene-, or cyano-substituents on the allene to afford the corresponding cycloadducts. In the presence of CO, the reaction proceeds to an eight-membered ring cycloadduct and its transannularly closed product, providing the first example of a three-component [5+2+1] cycloaddition with allenes.     

Improving splitless injection with electronic pressure programming

An experimental injection port has been designed for split or splitless sample introduction in capillary gas chromatography; the inlet uses electronic pressure control, in order that the column head pressure may be set from the GC keyboard, and the inlet may be used in the constant flow or constant pressure modes. Alternatively, the column head pressure may be programmed up or down during a GC run in a manner analogous to even temperature programming. Using electronic pressure control, a method was developed which used high column head pressures (high column flow rates) at the time of injection, followed by rapid reduction of the pressure to that required for optimum GC separation. In this way, high flow rates could be used at the time of splitless injection to reduce sample discrimination, while lower flow rates could be used for the separation. Using this method, up to 5 μl of a test sample could be injected in the splitless mode with no discrimination; in another experiment, 2.3 times as much sample was introduced into the column by using electronic pressure programming. Some GC peak broadening was observed in the first experiment.     

Perdeuterated Conjugated Polymers for Ultralow‐Frequency Magnetic Resonance of OLEDs

The formation of excitons in OLEDs is spin dependent and can be controlled by electron‐paramagnetic resonance, affecting device resistance and electroluminescence yield. We explore electrically detected magnetic resonance in the regime of very low magnetic fields (<1 mT). A pronounced feature emerges at zero field in addition to the conventional spin‐ Zeeman resonance for which the Larmor frequency matches that of the incident radiation. By comparing a conventional π‐conjugated polymer as the active material to a perdeuterated analogue, we demonstrate the interplay between the zero‐field feature and local hyperfine fields. The zero‐field peak results from a quasistatic magnetic‐field effect of the RF radiation for periods comparable to the carrier‐pair lifetime. Zeeman resonances are resolved down to 3.2 MHz, approximately twice the Larmor frequency of an electron in Earth's field. However, since reducing hyperfine fields sharpens the Zeeman peak at the cost of an increased zero‐field peak, we suggest that this result may constitute a fundamental low‐field limit of magnetic resonance in carrier‐pair‐based systems. OLEDs offer an alternative solid‐state platform to investigate the radical‐pair mechanism of magnetic‐field effects in photochemical reactions, allowing models of biological magnetoreception to be tested by measuring spin decoherence directly in the time domain by pulsed experiments.